top of page

Flintec SB5 Stainless Steel, Single-Ended Beam Load Cell – Ricelake

Made for multiple-cell applications, such as floor scales and tank, bin and hopper weighing systems. Used exclusively in Rice lake Weighing Systems’ Paramounts® EP mounting systems. Millivolt/volt/ohm factory calibration assures matched outputs for easy calibration. Available in both NTEP Certified and Non-NTEP Certified ranges 5 nK TO 100 kN.

SB5 Load Cell Specifications

Full Scale Output: 2.0 mV/V mV/V/ohm calibration

Output Resistance: 1,000 (± 2) ohm

Input Resistance: 1,100 (± 50) ohm

Material/Finish: Stainless steel

Temperature: Compensated range 14 °F to 104 °F (-10 °C to 40 °C) Operating range 0 °F to 150 °F (-18 °C to 65 °C)

Seal Type: Environmentally sealed, IP67Safe Overload: 200% full scale

Safe Sideload: 100% full scale

Rated Excitation: 5 to 10 VDC (15 V maximum)

Combined Error: ± 0.03% full scale

Insulation Resistance: 10,000 megohm

Deflection at Capacity: 5 kN: 0.008 in 10 kN: 0.012 in 20 kN: 0.02 in 50 kN: 0.012 inCable Length: 5 to 20 kN: 10 ft 50 to 100 kN: 15 ft Also available in 30 ft

Cable Diameter: 0.196 in Polyurethane jacket

Cable Color Code: Green +Excitation Black –Excitation White +Signal Red –Signal Yellow Shield

Warranty: One-year limited

Approvals: FM NTEP OIML

2 views0 comments


bottom of page