top of page

VPG Revere HPS Stainless Steel, Single Point Load Cell – Ricelake

This stainless steel, welded-seal, low-profile single-point load cell is designed for bench scale and checkweigher applications in caustic/acidic environments. Insensitive to off-center loading and tolerates most severe washdowns. Capacities range from 6 kg to 100 kg. Comes complete with 10 ft of load cell cable.

HPS Load Cell Specifications

Full Scale Output: 25 to 100 lb: 3.0 mV/V 6 kg: 2.0 mV/V

Output Resistance: 350 (± 7) ohm

Input Resistance: 400 (± 6) ohm

Material/Finish: Stainless steel

Temperature: Operating range 0 °F to 150 °F (-18 °C to 65 °C)Seal Type: Welded-seal, IP67

Safe Overload: 150% full scale

Rated Excitation: 5 to 10 VAC (15 V maximum)

Combined Error: 0.03% full scale

Non-repeatability: 0.01% full scale

Insulation Resistance: 5,000 megohmCable Length: 10 ft

Cable Color Code: Green +Excitation Black –Excitation White +Signal Red –Signal

Warranty: One-year limited

Approvals: cFMus

3 views0 comments

Kommentare


bottom of page